[. . . ] TG8611FX(e-e). book Page 1 Friday, June 3, 2011 11:23 AM
Operating Instructions
Digital Cordless Phone with TFT Colour Display
Model No.
KX-TG8611FX
Before initial use, see "Getting Started" on page 9.
Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. You must subscribe to the appropriate service offered by your service provider/telephone company. To use this unit in your country, first change the unit's region setting to match your country (page 31). [. . . ] You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code.
1 2
1 (middle soft key) y256 Enter the base unit PIN (default: "0000"). s M Enter the phone number or area code to be restricted (8 digits max. ). s M s {ic} L To erase a restricted number, press ^.
1 2 3 4 1 2 3
{3} (y) {r}: Select the entry to be barred. sMsI {r}: "Caller Barred" s M {r}: "Yes" s M s {ic} 1 (middle soft key) y217 sm Enter the phone number (24 digits max. ). {ic}
3
By entering phone numbers:
Viewing/editing/erasing bar call numbers
4 5 6
1 2 3
1 (middle soft key) y217 {r}: Select the desired entry. s M s {ic} To erase a number: W s {r}: "Yes" s M s {ic}
Changing the base unit PIN (Personal Identification Number)
Important: L If you change the PIN, please make note of your new PIN. If you forget your PIN, contact an authorised service centre.
Note: L When editing, press the desired dial key to add, ^ to erase.
30
TG8611FX(e-e). book Page 31 Friday, June 3, 2011 11:23 AM
Programming
1 2 3
1 (middle soft key) y132 Enter the current 4-digit base unit PIN (default: "0000"). s M s {ic}
Changing the unit's region setting/Resetting the base unit 1 1 (middle soft key) y136 2 {r}: Select the desired country. s
M
Message centre 1 and 2 (page 24) SMS on/off (page 24) L After changing the unit's region setting/resetting the base unit, _ is displayed on the handset momentarily. This is normal and the handset can be used once w is displayed.
Calendar/Schedule
You can program 20 schedule alarms for each handset using the calendar. L If the unit is connected to a PBX system, date information may not be properly received. Adding a new entry
3
{r}: "Yes" s M s {ic}
Note: L The following items will be deleted or reset to their default settings: SMS settings (page 24) Time Adjustment Base unit transmission power Privacy mode Base unit PIN Dial mode All SMS messages Caller list Voice mail messages Call restrict L The following items will be retained: Display language Date and time Handset name Repeater mode Call barred list L If you select the desired country in step 2, the following default settings will be changed for the selected country's default settings: Recall/flash time (page 26)
1 2
1 (middle soft key) s j s M {r}: Select the desired date. s M L To move to another month in the calendar, keep pressing {V} or {^}. s M 2 times L You can select "Off" if you prefer not to hear an alarm tone.
3 4 5 6 7
31
TG8611FX(e-e). book Page 32 Friday, June 3, 2011 11:23 AM
Programming
L We recommend selecting a different ringer tone from the one used for outside calls. L To add other entries, repeat from step 3.
1 2 3 4 5 1 2 3 4 5 6
1 (middle soft key) s j s M m s {r}: Select the desired entry. 1 s {r}: "Erase" s M {r}: "Yes" s M {ic}
8
{ic}
Note: L To stop the alarm, press k or place the handset on the charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. Viewing entries
Erasing all entries 1 (middle soft key) s j s M ms1 {r}: "Erase All" s M {r}: "Yes" s M {r}: "Yes" s M {ic}
1 2
1 (middle soft key) s j s M To see the entries on the selected date, press M. L You can see detailed information about the schedule by pressing l.
Baby monitor
This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby's room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound. Important: L You should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. [. . . ] Wait until the message has been sent before using other telephone functions. L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Confirm that SMS is turned on (page 39).
"FD" is displayed.
56
TG8611FX(e-e). book Page 57 Friday, June 3, 2011 11:23 AM
Useful Information
Problem "FE" is displayed. L Your phone number is permanently withheld or you have not subscribed to the appropriate service. [. . . ]